5
-17
OPERATION
working on the slope, you should
make the breadth of the tractor wider
(breadth of left and right tire).
7. As the length of the tractor can get
much longer according to the kinds
of the implement, be careful of the
persons or objects around the job
field when turning the corner.
8. Do not load any person or objects
instead of the balance weight.
9. When you are working with the front
loader, keep the balance by attach-
ing the implement in the rear.
WARNING
!!
!!
!
If you neglect this rule, you can
be easily injured.
THE CAUTIONS WHEN AT-
TACHING AN IMPLEMENT
S43O517A
A : Traction power is not required
B : Heavy load traction work
C : Normal load traction work
A plate describing how to attach
the implement is placed on the
standard implement of our
company.
When you are attaching an
implement (like rotary) not re-
quiring any traction, mount the
assembling spot of the top link
into the hole A or B.
When you are attaching an
implement (like plow) requiring
some traction, mount the assem-
bling spot of the top link into the
hole C.
When you are moving with an
attached implement, you have
to mount the top link into the
hole A or B. If not, the lifting
part can be troubled, and it can
fall down because the draft sen-
sor is activated.
!!
!!
!
CAUTION
To Next Page
Loading...
