DK90
1
-4
A ROPS and CAB should never be
modified by welding, grinding or cutting,
as this can weaken the ROPS
structure. If any components of the
ROPS unit is damaged, it must be
replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original positions
and all bolts should be properly torqued.
Always use seat belt when the trac-
tor is equipped with a ROPS and
CAB. All tractors in U.S. must
have CAB or ROPS.
21. Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you
should adjust your rear wheel tread
width, see page 8-3.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position.
20. For your safety ROPS with a seat
belt is recommended for most
applications.
(1) Tread
S43O106A
S43O107A
NOTE
To Next Page
Loading...
