Kioti NX5510 User Manual

1
-
7
1
-
6
SAFETY PRECAUTIONSNX4510/NX5010/NX5510/NX6010
1
1
-
7
1
-
6
SAFETY PRECAUTIONSNX4510/NX5010/NX5510/NX6010
9. Check for correct coupling be-
tween tow hook and trailer. See
the Towing Attachments chapter.
10. Use ballast weight as recom-
mended. Never add more ballast
to compensate a higher load than
allowed. Reduce load for safety.
11. A safety chain will help control
drawn equipment should it be
accidentally separated from the
draw-bar while transporting. Us-
H11O682a
ing the proper adaptor parts,
attach the chain to the tractor
draw-bar support or other speci-
fied anchor locations. Provide
only enough slack in the chain to
permit turning. See your Dealer
for a chain with a strength rat-
ing equal to, or greater than the
gross weight of the towed equip-
ment.
7. Improper use of the draw-bar, even
if correctly positioned, can cause a
rear overturn.
8. Do not overload an attachment
or towed equipment. Use proper
counterweights to maintain tractor
stability. Hitch heavy loads to the
draw-bar only.
M55O117a
TE120(NX4510,5010,5510)CABIN,ROP7 7 2014-03-27 오전 10:27:30

Kioti NX5510 Specifications

General

Fuel Capacity	13.2 gallons
Rated Speed	2, 600 rpm
Brakes	Wet Disc
Hydraulics Type	Open Center
PTO Speed	540 rpm
Transmission	HST or Synchro Shuttle
Steering	Power steering
3-Point Hitch Category	Category I
PTO	Independent
Operating Weight (ROPS Model)	3, 527 lbs (1, 600 kg)
3-Point Hitch	Category I
Engine Type	Diesel