Kipor KM2V80 - Technical Maintenance; Daily check and periodic check

Technical maintenance
1. Daily check and periodic check
Engine’ performance will be deteriorated if the operation condition becomes worse or time
prolongs, such as: fuel and oil consumption increase, exhaust harmful substance increases, or
vibratory and noise increase. Please strengthen the maintenance service of engine, insist on
daily check and periodic maintenance, which will prove efficiency and prevent fault.
Check can be divided into daily check and periodic check.
Daily check: Do daily check before starting engine, and operate it as a rule.
Periodic check: Suggest you make a running diary, writing down results of everyday operation
and check, accumulating total running time. Start your periodic check and maintenance
according to below table (table 5).
Periodic check can be divided into: 50h、250h、500h、1000h、2000h(h: hours)
Time interval of periodic check can be properly advanced or delayed according to the engine’s
purpose, location condition, fuel or lube oil’s quality and other using conditions.
Table 5 Periodic check table of engine
System
Checking item
Everyday
50h
250h
500h
1000h
2000h
Fuel
Check and refill fuel oil
○
Check for oil leakage
○
Drain out fuel oil
○
Replace the oil filter element
◎
Lube oil
Check and refill lube oil
○
Check for oil leakage
○
Replace lube oil
◎first
time
◎seco
nd time
Replace lube filter element
Cooling
water
Check and refill cooling water
○
Clean radiator element
○
Replace cooling water
◎
Wash and maintain cooling
system
●
Robber
pipe
Replace fuel pipe and cooling
water tube
○
◎
Operation
system
Speed regulator operation
○
Idle adjust
●
Inlet
system
Clean and replace air cleaner
element
○clean
◎
Electric
parts
Check alarm
○
Check electrolyte and charge
the battery
○
Cylinder
cover
Adjust clearance of
intake/exhaust valve
○first
time
○seco
nd
time
Wear of intake/exhaust valve
sealing ring belt
●