Kipor KM2V80 - Disassemble the governor assembly, fuel injection pump assembly and fuel pump tappet.; Disassemble the flywheel parts and electromagnetic rotor parts

1.14 Disassemble the flywheel parts and electromagnetic rotor parts
(1) Loosen the four M10X32 flywheel bolts which fix the flywheel on the crankshaft.
(2) Remove the flywheel parts and electromagnetic rotor parts.
Refer to picture 24
picture 24
1.15 Disassemble the stator coil parts
(1) Loosen the three M6X25 bolts and one bolt which fix the stator coil parts on the engine rear
end.
(2) Remove the stator coil parts
Refer to picture 25
picture 25
1.16 Disassemble the crankcase cover parts
(1) Loosen the seventeen M8X40 bolts which fix the crankcase cover.
(2) Remove the crankcase cover parts.
Refer to picture 26
picture 26