4.2 Advanced Functions
Frequency bands:
2G GSM: B2+B3+B5+B8
3G WCDMA: B1+B2+B5+B8
4G LTE: FDD: B1+B3+B7+B20+B5+B8
TDD: B38+B40+B41
Display of field intensity to indicate signal strength
Display of battery capacity, alarm for low voltage
Display of groups and states of terminals
4.3 Parameter Settings
The radio has been set before delivery. However, to meet customers’ requirements, further configuration
may be necessary, for example, programming of a function key, Wi-Fi, Bluetooth, roaming and Pin lock.
This can be achieved by the programming software PC Tool developed by Kirisun. It is user-friendly and
easy to operate, and supports Chinese, English and Turkish.
Take the following steps to set parameters of the radio on a PC.
1. Install the PC Tool on the PC. (By default, the language is set automatically language system)
2. Charge the radio. Connect the radio to the PC using the programming cable.
Note: While connecting the radio and the PC, make sure they are powered off.
3. Power on the PC.
4. Power on the radio.
5. Run the PC Tool.
6. Click Read from the menu, and the PC will read the parameters of the radio.
7. There are two ways to write data. One is to go to a menu item and click Set, and the other is to click
Write after setting all parameters.
To Next Page
Loading...
Need help?
General
