What to do if Kirisun Two-Way Radio has abnormal programming?
If you are experiencing abnormal programming with your Kirisun Two-Way Radio, check the cable connection to ensure it is properly connected. Also, verify that the USB driver is installed on your PC; if not, install the driver. Lastly, check if the interface board of the earphone is in poor contact; if it is, replace the board.
How to fix Kirisun DP580-01 Two-Way Radio that failed to power on?
If your Kirisun Two-Way Radio fails to power on, the battery might be depleted. Try charging the battery or replacing it with a new one. Alternatively, the volume switch could be faulty, requiring repair at an authorized service station.
Why my Kirisun Two-Way Radio failed to transmit or receive?
If your Kirisun Two-Way Radio fails to transmit or receive, it might be due to wrong channel parameters. Reset the parameters and try again. Another reason could be a wrong group identity for default contact, so select the correct group. Finally, you might be beyond the communication scope, so reduce the communication distance.
What to do if GPS positioning fails on Kirisun DP580-01 Two-Way Radio?
If GPS positioning fails on your Kirisun Two-Way Radio, first check if the antenna is dual-mode. If it's not, replace it with a dual-mode antenna. Also, check if GPS positioning is properly set; if not, reset it. Lastly, ensure the radio is in an open area, as a blocked environment can interfere with GPS.
Why is voice so small during call on Kirisun DP580-01 Two-Way Radio?
If you experience a small voice during a call on your Kirisun Two-Way Radio, you might be speaking too far from the microphone. The ideal distance is 3-10cm. Alternatively, the volume setting might be too low. Turn the volume knob clockwise to increase the volume.
General| Frequency Range | 400-470 MHz |
|---|---|
| Power Output | 5W |
| Battery Capacity | 2000 mAh |
| Operating Voltage | 7.4V |
| Water Resistance | IP54 |
| Battery Type | Li-ion |
| Digital Protocol | DMR |
Important safety precautions for radio operation and handling.
Details on radio compliance with RF energy exposure standards.
Procedures to minimize RF exposure during radio use.
Detailed guide on charging the battery and maintaining its lifespan.
Functions like Emergency Alarm and Exit Alarm assigned to keys.
Procedures for making and receiving calls on the radio.
Steps for editing and sending standard text messages.
Detailed steps for initiating an emergency alarm.
Procedures for responding to and ending an emergency alarm state.
Resolving issues related to power, volume, and audio clarity.
Addressing problems with transmitting, receiving, and GPS functionality.
To Next Page
