Need help?Do you have a question about the KIRLOSKAR UP 150/30 and is the answer not in the manual?
General| Brand | KIRLOSKAR |
|---|---|
| Model | UP 150/30 |
| Category | Power Pump |
| Language | English |
Details the conditions and duration of the pump warranty.
Explains pump type designation and describes casing, impeller, shaft, etc.
Outlines essential safety rules for installation, operation, and maintenance.
Provides guidelines for safe handling, transporting, and storing the pump.
Steps for inspecting the pump upon receipt and preparing it for installation.
Guidance on choosing the pump location and constructing a suitable foundation.
Instructions for leveling the baseplate and applying grout for stability.
Procedures for aligning pump and driver, and installing suction/discharge piping.
Steps to follow before initial pump startup, including inspections.
Guidelines for safely starting, operating, and shutting down the pump.
Information on bearing types, care, and lubrication specifications.
Details on stuffing box packing and mechanical seal types and care.
Covers coupling, flow rates, NPSH, forces, sizes, speed, torque, and weights.
Details on the interchangeability of various pump components.
Safety precautions for maintenance and a routine maintenance checklist.
Procedures for dismantling, overhauling, and reassembling the pump.
Provides a table of general outline dimensions for various pump models.
Lists part codes and descriptions for recommended spares.
Includes detailed cross-sectional views of pump configurations.
A visual breakdown of pump components with part identification.
Summarizes critical points on installation, operation, and general warnings.
A table to diagnose pump issues by correlating breakdowns with check points.
To Next Page