1.5.6 Temperature monitoring with PC-KIT-STICK
The temperature memory of the unit documents the maximum and
minimum temperature values.
PC-KIT-STICK is the easiest method of automatic temperature
documentation.
The internal memory is a circular buffer. Before the oldest data are
overwritten, the data are kept stored for 90 days. Therefore, we
recommend to regularly read out the data, for example, weekly or
monthly, in order to avoid gaps in recording.
The data transfer is performed via a USB flash drive. Even while
the data are read out, the temperatures is constantly documented.
An unlimited number of units can be incorporated
Ä
‘Interfaces’
on page 15.
For constant temperature monitoring, the unit can be equipped with
temperature documentation via the network
Ä
Chapter 1.7.1 ‘Tem-
perature documentation’ on page 19.
1.5.7 Temperature sensor
The unit is equipped with multiple temperature sensors.
For the functions of the respective temperature sensors, see the
following table:
Colour Description Function
Evaporator sensor
(red)
Controls the defrosting
phase
Control sensor
(brown)
Controls the monitoring unit
Control sensor
(violet)
Controls the monitoring unit
1.6 Battery
The battery powers the temperature monitoring for up to 30 hours
in the event of a power failure.
Temperature monitoring ensures that the temperature progression
is stored and the temperature alarm is triggered if necessary.
The battery charges during normal operation and is monitored by
an automatic charging system.
Technical data for the battery:
n 6 V, 4 Ah
Battery function
Product description
Battery
23.05.2023Refrigerator/freezer LABO series18
To Next Page
Loading...
