6.2.1 Target temperature
6.2.1.1 Function of the target temperature
The target temperature specifies the temperature at which the unit
is operated to store the chilled goods in optimal conditions.
The target temperature of the unit is preset by KIRSCH.
Changes to the target value do not change the temper-
ature warning limits. These are adjusted manually
Ä
Chapter 6.2.1.2 ‘Displaying and changing the target
temperature’ on page 39.
6.2.1.2 Displaying and changing the target temperature
NOTICE!
The factory-set values for the target temperature
comply with the valid DIN standards. Incorrect changes
to the target temperature and the temperature warning
limits can cause irreparable damage to the chilled
goods.
Press button [Target temperature].
ð
The current target temperature is displayed.
Changes must be performed by
qualified employees
Displaying the target temperature
Commissioning
Programming the unit > Target temperature
23.05.2023 Refrigerator/freezer LABO series 39
To Next Page