1. Insert unit key in key switch.
NOTICE!
Danger due to faulty programming!
By putting the key in key position “P” it is possible to
access the programming functions of the unit. Program-
ming that is unsuitable for the chilled goods can cause
damage to the chilled goods.
– Have programming performed by qualified
employees.
– Once programming is complete, turn the key switch
to position “1” and remove the key.
– Secure the key against unauthorised access.
– Do not operate the unit in key position “P”.
2. Turn unit key to position “P”.
3. Press and hold button [Target temperature].
4. Use button [Min.] or [Max.] to set the required target value.
5. Turn unit key to position “1”.
ð
The unit regulates the temperature to the specified target
value.
Monitor the temperature progression!
The unit will not reach the new target value
immediately after the change is made.
Monitor the temperature progression on the
Display or using optional temperature docu-
mentation (e.g. KIRSCH-PC-KIT).
6. Read the current temperature and monitor the subsequent
temperature progression until the target temperature is
reached.
Changing the target temperature
Commissioning
Programming the unit > Target temperature
23.05.2023Refrigerator/freezer LABO series40
To Next Page
Loading...
