Kistler 9317C - Tips on the Use of this Instruction Manual; What Happens in the Event of Changes

Triaxial load cell Type 93x7C
Page 6 93x7C_002-893e-06.21
2.2 Unpacking
Check all packaging for transport damage. Report any such
damage to the transporters and to the authorized Kistler
distributor.
2.3 Notes on handling the instrument
 The load cell must only be used under the specified
environmental and operating conditions.
 With piezoelectric sensors, insulation resistance is of
crucial importance. In order to preserve this critical
property, all plug-and-socket connections must be kept
absolutely clean and dry. The insulation resistance can
be measured with the insulation tester Type 5493.
 Protect the connector of the sensor against
contamination and on no account touch it with your
fingers (connector front). Fit the cover supplied over the
connector when it is not in use.
 A high-insulation cable is used to connect the sensor to a
charge amplifier. Once fitted, it should if possible remain
connected to the sensor. Use only specified connecting
cables.
 Protect the sensor when it is not in use by storing it in
its original packaging.
Important notes
93x7C_002-893e-06.21 Page 7
2.4 Tips on the use of this instruction manual
We recommend you to read through the entire instruction
manual. However, if you are in a hurry and already have
experience with Kistler triaxial force transducers, you can
restrict yourself to the specific information needed.
We have endeavored to give these instructions a neat
layout to make it easy for you to gain direct access to the
information you require.
Please keep these instructions in a safe place where they
are always to hand.
If you lose these instructions, please contact your Kistler
customer service organization and you will receive a re-
placement by return.
All details and directions in these instructions are subject to
change at any time without prior notice.
2.5 What happens in the event of changes?
Equipment modifications will normally result in changes
to the instruction manual. In such cases, please contact
your Kistler customer service organization concerning
updating facilities for your documentation.