Need help?Do you have a question about the Kistler maXYmos BL and is the answer not in the manual?
General| Sampling Rate | 10 kHz |
|---|---|
| Power Supply | 24 VDC |
| Protection Class | IP20 |
| Measurement Range | Depends on sensor used |
| Resolution | 16 bit |
| Accuracy | 0.1% of range |
| Interface | Ethernet, USB |
| Operating Temperature | 0°C to 50°C |
| Display | Touchscreen LCD |
| Data Storage | Internal memory, USB |
| Storage Temperature | -20 to +70 °C |
Safety instructions for handling the monitor and ensuring safe operation.
Instructions for checking packaging for transit damage and verifying accessories.
Safety precautions for transporting and storing the monitor to prevent damage.
Information on the monitor's voltage range and polarity protection.
Conformance to EMC requirements and standards.
Guidelines for disposing of electrical and electronic equipment responsibly.
Overview of the maXYmos BL's features, design, and capabilities.
Overview of the monitor's interfaces and how signals flow through it.
Diagram illustrating data flow and access methods for the maXYmos BL.
Explanation of how parameters are structured and where they are stored.
Description of the hierarchical menu structure of the monitor.
How to navigate through menu groups and individual menu pages.
Steps to access and use the monitor's setup level for configuration.
Global configuration options for monitor parameters.
Settings for configuring the measuring channels of the monitor.
Settings for configuring the cycle control parameters of the monitor.
Configuring the display format for process views and bar graphs.
Setting to include only the first NOK EO in bar graph statistics for clearer cause analysis.
Instructions for configuring data export settings from the maXYmos device.
Setting hysteresis values for switch signals and trigger points.
Configuring the digital input and output (IO) settings of the monitor.
Setting up and configuring fieldbus communication for the device.
Configuring how the monitor responds to warnings and alarms.
Configuring display and audio settings, such as screen saver and beep sounds.
Setting device names and comments for identification and logging.
Configuring network settings like IP address and DHCP for connectivity.
Steps to access the setup menus specific to a measuring program (MP).
Editing evaluation objects using the EO Editor.
Detailed guide on setting up evaluation objects (EOs) for curve analysis.
Configuring reference points for evaluation objects.
How to test newly configured evaluation objects and adjust parameters.
Overview of the different types of evaluation objects available.
Setting the catch zone for capturing process values.
Setting up and configuring switch signals for control tasks.
Configuring the display format for process views and bar graphs.
Setting scaling and reference points for curve graphs within the process view.
Selecting the source for process values displayed in the value table.
Configuring the source for part identification (serial number) generation.
How to configure channel X settings specifically for a measuring program (MP).
How to configure channel Y settings specifically for a measuring program (MP).
How to configure cycle control settings specifically for a measuring program (MP).
Tools for managing measuring programs, including copying and naming.
Overview and features of the Sequencer Mode for advanced process control.
An example illustrating the application of sequencer mode elements in a complete sequence.
Diagrams showing the location of all female connectors on different maXYmos BL types.
Details on the various interfaces and connectors of the maXYmos BL.
Signal flowcharts illustrating PLC control of the maXYmos BL.
Instructions for setting up and using VNC for remote access to the maXYmos BL.
Steps for downloading and updating the firmware using the maXYmos PC software.
How to save and restore device settings using the maXYmos PC software.
Using the Setup-Editor and Backup-Interpreter for parameter management.
Using Protocol Explorer and Viewer for analyzing exported CSV logs.
Configuration steps for various fieldbus types.
Setting the data format for fieldbus communication (endianness).
Explanation of the telegram structure for fieldbus communication.
Details on control signals and input/output control bits for fieldbus.
Configuring input and output telegrams for fieldbus communication.
Description of data objects and their formats for fieldbus communication.
Reference table showing feature availability across different firmware versions.
Information on control signals and data transfer between PLC and maXYmos.
Visual overview of different mounting options for the maXYmos BL.
Physical dimensions and mounting details for different versions.
List of general accessories available for the maXYmos BL, including software.
Information about the range of sensors compatible with the maXYmos BL.
To Next Page
