Kistler MiniDyn 9119AA1 User Manual

Important Information
9119AA1_002-622e-02.15 Page 5
2. Important Information
It is essential to follow the instructions below for your own
personal safety when working and to ensure long-lasting,
trouble-free operation of the device.
2.1 For Your Safety
 This device has been thoroughly tested and was
perfectly safe when it left the factory. To keep it in this
condition and ensure risk-free operation, the user must
observe the information and warnings contained in this
Instruction Manual.
 The dynamometer must only be installed, operated and
repaired by persons who are familiar with the device
and who are suitably qualified for their particular work.
 If you believe that the device can no longer be operated
without risk, it must be taken out of operation and
secured to prevent accidental operation.
You should believe that the device can no longer be
operated without risk,
 if there are visible signs of damage on the device,
 if the device is no longer working,
 after prolonged storage under adverse conditions,
 if mishandled during transportation.
When measuring the cutting force, fasten the
dynamometer to the machine tool as specified! Details
can be found in the 4.2 "Mounting the dynamometer"
chapter.
Fasten all the parts mounted on the cover plate of the
dynamometer in accordance with the forces that are
expected!

Kistler MiniDyn 9119AA1 Specifications

General

Brand	Kistler
Model	MiniDyn 9119AA1
Category	Measuring Instruments
Language	English