CMD + SHIFT CLICK TO CHANGE COPY
16
TIPS FOR GREAT RESULTS
Cleaning the Blender
The Blender pitcher can be easily cleaned while still attached to the base, or individually.
• Clean the Blender thoroughly after every use.
• Do not immerse the Blender base or cord in water.
• Do not use abrasive cleansers or scouring pads.
1
To clean the Blender base, control
band, cord, lid, and ingredient cup:
Unplug the Blender before cleaning.
Wipe with a warm, damp cloth; wipe
clean with a damp cloth, and dry with a
soft cloth.
2
To clean the pitcher while attached
to the base: With the pitcher off of
the base, fill half full with warm (not
hot) water, and add 1 or 2 drops of
dishwashing liquid. Put the lid on the
pitcher and attach the pitcher to the
base, press the STIR speed setting, and
run the Blender for 5 to 10 seconds.
Remove the pitcher and rinse with
warm water.
3
To clean pitcher individually: Wash
pitcher in dishwasher flipped upside
down. Or handwash with soapy water,
rinse, and wipe dry.
CARE AND CLEANING
Prepare pancake or waffle batter from
mix: Place mix and other ingredients in
pitcher. Cover and blend at MIX (
) until
well-mixed, 10 to 20 seconds. Stop the
Blender and scrape sides of the pitcher
as needed.
Grate cheese: Cut very cold cheese into
1.5 cm cubes. Place up to 1/2 cup (120 mL)
cheese in the pitcher. Cover, and blend at
LIQUIFY (
) about 5 to 10 seconds.
For hard cheeses, such as Parmesan, bring
to room temperature then blend at LIQUIFY
(
) for 10 to 15 seconds.
IMPORTANT: Hand wash the lid and
ingredient cup for best results.
W10517477A_ENv6.indd 16 12/13/13 3:38 PM
To Next Page
Loading...
