ASSEMBLING THE BLENDER
2
Rotate pitcher clockwise, approximately
1/8 turn until pitcher clicks into place.
3
Adjust the length of the Blender power
cord.
4
Securely attach lid to pitcher, making
sure the handle on the lid aligns with the
handle on the pitcher, as shown.
NOTE: When properly positioned, pitcher
will rest completely on Blender base. If not,
repeat steps 1 and 2.
Preparing the Blender for use
1
Align the pitcher tabs with the slots on
the base. The pitcher handle may be on
the right or left side of the blender base.
Before First Use
Before using your Blender for the first time,
wipe Blender base with a warm damp cloth,
then wipe clean with a damp cloth. Dry with
a soft cloth. Wash pitcher, lid, and ingredient
cup in warm, sudsy water (see “Care and
Cleaning” section). Rinse parts and wipe dry.
Ta b
Slot
W10517477A_ENv6.indd 9 12/13/13 3:38 PM
To Next Page
Loading...
