To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid KMTM704E Series and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Place Settings | 14 |
| Energy Star Certified | Yes |
| Third Rack | Yes |
| Stainless Steel Tub | Yes |
| Soil Sensor | Yes |
| Delay Start | Yes |
| Control Type | Electronic |
| Noise Level | 46 dBA |
| Options | Hi Temp Wash, Sani-Rinse Option, ProDry Option |
| Width | 23 7/8 Inches |
Important safety warnings and precautions for operating and servicing the dishwasher.
Explains the microfiltration wash system and how the dishwasher cleans dishes.
Details key new features and components like Advanced ProDry™ and Dynamic Wash Arm.
Guides on locating model/serial labels and understanding nomenclature.
Technical specifications including electrical, water, dimensions, and component details.
Visual identification of major parts and features within the dishwasher tub and racks.
Provides miscellaneous notes and remarks related to general information.
Basic steps for starting the dishwasher and quick operational tips.
A concise step-by-step guide for loading and starting the dishwasher.
Detailed instructions on proper loading, detergent, and rinse aid usage.
Explains available wash cycles, soil levels, wash times, and options.
Information on cycle status indicators, canceling, and changing cycles.
Details specific features like ProScrub®, racks, and holders for improved usability.
Instructions for cleaning the exterior, interior, and filter system for optimal performance.
Common problems, potential causes, and solutions for user-level issues.
Provides miscellaneous notes related to dishwasher operation.
Critical safety warnings and guidelines for installing the dishwasher.
Lists necessary tools, parts, and general site requirements for installation.
Specifies ideal placement criteria and necessary clearances for proper installation.
Provides detailed measurements for cabinet openings and dishwasher dimensions.
Details requirements for drain hose connection and water supply lines.
Outlines necessary electrical supply specifications and connection methods.
Step-by-step procedures for preparing the unit and connecting utilities.
Procedures for installing the insulation blanket and removing the door latch strike.
Details on adjusting door springs and accessing water inlet/drain hose components.
Guides for accessing and disassembling the Advanced ProDry™ system components.
Procedures for accessing and removing the overfill protection assembly.
Instructions for accessing and replacing the interior LED lighting system.
Guides for removing the outer door panel and user interface assembly.
Step-by-step instructions for removing the detergent dispenser assembly.
Visual guide identifying components located inside the dishwasher tub.
Guides for removing the upper rack, lower rack, and culinary tool rack.
Procedures for removing the drain pump and sump assembly.
Procedures for accessing and removing the main electronic control board.
Instructions for removing the heater element assembly.
Safety precautions for technicians performing diagnostic measurements and handling electronics.
Information on how to invoke and operate the service diagnostic cycle for testing.
Detailed notes and explanations for interpreting the diagnostic cycle results.
Guidance on advancing through customer cycles for testing purposes.
Explains how to access and interpret error codes during diagnostics.
A table listing function codes, problem codes, causes, and checks for error resolution.
A guide addressing common customer-described problems and their potential solutions.
Essential safety guidelines for performing electrical tests on the appliance.
Schematic illustrating electrical connections and component layout for the dishwasher.
Details on control board specifications, fuse checks, and component testing.
Steps to verify incoming and outgoing power to the control board.
Procedures to test the door switch wiring and its continuity.
Guides for testing the fill valve, overfill switch, and related wiring.
Procedures to test the dispenser solenoid or wax motor and its circuit.
Steps to test the heater element, hi-limit thermostat, and heating circuit.
Procedures to test the OWI sensor for water, temperature, and foam detection.
Guides for testing the diverter motor and its resistance and voltage.
Procedures to test the diverter sensor/position switch continuity.
Steps to test the wash motor resistance, capacitor, and voltage.
Procedures to test the drain motor resistance and voltage.
Guides for testing the lower spray arm motor resistance and voltage.
Procedures to test the AC fan motor resistance and voltage.
Steps to test the interior LED lighting circuit and individual LEDs.
Procedures to test the user interface for proper response and connection.
Provides miscellaneous notes related to testing procedures.
Provides phone numbers and website for product specs, warranty, and technical assistance.
