— 5 —
NEVER dropping or releasing a load could result in death or serious
injury. To avoid this hazard, do not operate the bottom hook
release mechanism (hook cam) when the hoist with
cylinder-controlled or optional detachable hook is under load.
NEVER use a hoist in flammable atmosphere where explosion is
possible.
NEVER use the limit switch or friction clutch on a regular basis. These
devices are for emergency use only.
NEVER adjust or repair a hoist unless qualified people to perform
hoist maintenance.
NEVER use the railstops to exert impact force on the hoist or the
trolley.
NEVER use a hoist without a chain stopper at the end of no-loaded
side chain.
NEVER attempt to lengthen the load chain or repair damaged load
chain.
NEVER adjust or repair the mechanical brake with friction clutch
unless qualified people to perform hoist maintenance.
NEVER pull the push button cord.
NEVER use a hoist beyond 10% higher than the actual power source
voltage. (Refer to Sec. 3-2, (5))
NEVER throw a hoist.
NEVER use a hoist without a name plate or warning labels or with
illegible name plate or labels.
NEVER remove or obscure the waning tags.
NEVER use modified or deformed hooks.
NEVER use the hoist near fire or where hot objects may touch it.
NEVER touch live electrical parts.
NEVER use the electric chain hoist without grounding it.
NEVER ground the electric chain hoist to a gas pipe as this can create
the possibility of explosion.
NEVER handle the arm-fitting during the hoist operation.
NEVER throw or drop the hoist when carrying it.
WARNING TAGS are installed on a cord.
To Next Page
Loading...
Need help?
General
