EasyManua.ls Logo

KKT Compact-Line cBoxX 80 - 1 Product Description; Intended Use

Default Icon
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.
1.1.
1. Product description
Product descriptionProduct description
Product description
Please read all the points in these operating instructions before starting up the machine. You
should pay particular attention to the points on safety,
you have further questions about your machine, please contact the KKT
(see
see see
see Table 1
Table 1Table 1
Table 1:
: :
: Contact
ContactContact
Contact details
detailsdetails
details).
1.1.
1.1.1.1.
1.1. Intended use
Intended useIntended use
Intended use
The cBoxX is a factory-
tested, fully automatic compressor chiller. The machine
liquids (fluids) in accordance with EN
Only approved liquids may be used. The cBoxX corresponds to protection class IP
housing is closed) and is suitable for both
packages).
The operator is responsible for complying with the specified operating, servicing and maintenance
conditions according to these operating instructions.
The owner of the chiller, not the
and damage to property caused by improper use of the unit (misuse).
Table 2 shows the general safety instructions of the chiller. These are attached to the machine in
a clear and readily vi
sible position. A complete description of all hazard warnings is given in
Chapter 4.2
Hazard
HazardHazard
Hazard
warnings
warningswarnings
warnings.
..
.
Table
TableTable
Table
2
22
2: Safety instructions
: Safety instructions: Safety instructions
: Safety instructions
Note and follow the instructions for use!
Note and follow the instructions for use!Note and follow the instructions for use!
Note and follow the instructions for use!
Before opening the machine
Before opening the machineBefore opening the machine
Before opening the machine
After disconnecting the machine from the power supply, always wait for at least
After disconnecting the machine from the power supply, always wait for at least After disconnecting the machine from the power supply, always wait for at least
After disconnecting the machine from the power supply, always wait for at least
2 minutes before opening it.
2 minutes before opening it.2 minutes before opening it.
2 minutes before opening it.
Danger! High voltage! If the machine is only switched off at its main switch,
Danger! High voltage! If the machine is only switched off at its main switch, Danger! High voltage! If the machine is only switched off at its main switch,
Danger! High voltage! If the machine is only switched off at its main switch,
dangerous electric
dangerous electricdangerous electric
dangerous electric
cabinet.
cabinet.cabinet.
cabinet.
8 / 77
Please read all the points in these operating instructions before starting up the machine. You
should pay particular attention to the points on safety,
commissioning/startup and operation. If
you have further questions about your machine, please contact the KKT
chillers
tested, fully automatic compressor chiller. The machine
liquids (fluids) in accordance with EN
378-
1. An adequate supply of cooling air must be provided.
Only approved liquids may be used. The cBoxX corresponds to protection class IP
housing is closed) and is suitable for both
indoor and outdoor installation (note the options
The operator is responsible for complying with the specified operating, servicing and maintenance
conditions according to these operating instructions.
The owner of the chiller, not the
manufacturer, is responsible and liable for all personal injuries
and damage to property caused by improper use of the unit (misuse).
Table 2 shows the general safety instructions of the chiller. These are attached to the machine in
sible position. A complete description of all hazard warnings is given in
Note and follow the instructions for use!
Note and follow the instructions for use!Note and follow the instructions for use!
Note and follow the instructions for use!
Before opening the machine
Before opening the machineBefore opening the machine
Before opening the machine
it must be disconnected from the power supply!
it must be disconnected from the power supply! it must be disconnected from the power supply!
it must be disconnected from the power supply!
After disconnecting the machine from the power supply, always wait for at least
After disconnecting the machine from the power supply, always wait for at least After disconnecting the machine from the power supply, always wait for at least
After disconnecting the machine from the power supply, always wait for at least
2 minutes before opening it.
2 minutes before opening it.2 minutes before opening it.
2 minutes before opening it.
Danger! High voltage! If the machine is only switched off at its main switch,
Danger! High voltage! If the machine is only switched off at its main switch, Danger! High voltage! If the machine is only switched off at its main switch,
Danger! High voltage! If the machine is only switched off at its main switch,
dangerous electric
dangerous electricdangerous electric
dangerous electric
al voltage is still present at several terminals in the control
al voltage is still present at several terminals in the control al voltage is still present at several terminals in the control
al voltage is still present at several terminals in the control
83000102.Kf
Please read all the points in these operating instructions before starting up the machine. You
commissioning/startup and operation. If
chillers
Service Team
tested, fully automatic compressor chiller. The machine
is solely for cooling
1. An adequate supply of cooling air must be provided.
Only approved liquids may be used. The cBoxX corresponds to protection class IP
54 (when the
indoor and outdoor installation (note the options
The operator is responsible for complying with the specified operating, servicing and maintenance
manufacturer, is responsible and liable for all personal injuries
Table 2 shows the general safety instructions of the chiller. These are attached to the machine in
sible position. A complete description of all hazard warnings is given in
it must be disconnected from the power supply!
it must be disconnected from the power supply! it must be disconnected from the power supply!
it must be disconnected from the power supply!
After disconnecting the machine from the power supply, always wait for at least
After disconnecting the machine from the power supply, always wait for at least After disconnecting the machine from the power supply, always wait for at least
After disconnecting the machine from the power supply, always wait for at least
Danger! High voltage! If the machine is only switched off at its main switch,
Danger! High voltage! If the machine is only switched off at its main switch, Danger! High voltage! If the machine is only switched off at its main switch,
Danger! High voltage! If the machine is only switched off at its main switch,
al voltage is still present at several terminals in the control
al voltage is still present at several terminals in the control al voltage is still present at several terminals in the control
al voltage is still present at several terminals in the control

Table of Contents

Related product manuals