39
2
Clean or replace each filter. (See figure)
3
Set the air filter and Titanium Apatite Photocatalytic Air-
Purifying Filter as they were and close the front panel. Ope-
ration without air filters may result in troubles as dust will
accumulate inside the indoor unit.
4
• Wash the air filters with water or clean them with vacuum
cleaner.
• If the dust does not come off easily, wash them with
neutral detergent thinned with lukewarm water, then dry
them up in the shade.
• It is recommended to clean the air filters every week.
Titanium Apatite Photocatalytic Air-Purifying Filter
The Titanium Apatite Photocatalytic Air-Purifying Filter can be renewed by washing it with water once every 6
months. We recommend replacing it once every 3 years.
• Vacuum dusts, and soak in warm water or water for about 10 to 15 minutes if dirt is heavy.
• Do not remove filter from frame when washing with water.
• After washing, shake off remaining water and dry in the shade.
• Since the material is made out of paper, do not wring out the filter when removing water from it.
Replacement
• Remove the tabs on the filter frame and replace with a new filter.
• Dispose of the old filter as flammable waste.
Filter
Titanium Apatite
Photocatalytic
Air-Purifying
Filter
To Next Page
Loading...
