30
EN
9. Loosen the cover plate. Then guide the power cable of the cooker bonnet through
the cover plate and connect it to the power cable coming out of the ceiling. Make
sure that the power cable is well wrapped with insulating tape to avoid electric
shock (see image 7).
10. Loosen the four adjusting screws and align the bonnet horizontally. Tighten the 4
wire ropes evenly in a clockwise direction. Reattach the cover plate and secure the
power cable with the cable tie along the wire rope (see image 8). The installation is
now complete.
Image 7 Image 8
To Next Page
Loading...
