klover SOFT 80 - Page 3

SERVICE DECLARATION
Ref. Annex III EU Regulation no. 305/2011
DoP/KLOVER-048
1. Identification number
:
S80
2. Model and/or lot no. and/or serial no. (Art.11-4)
:
SOFT 80
3. Intended use of the product according to the
relevant harmonised technical specification
:
Wood pellet-fired domestic heating appliance
4. Name or trademark of the manufacturer (Art11-5)
:
KLOVER s.r.l.
I - 37047 San Bonifacio (VR) – Via A. Volta, 8
5. Name and address of the representative (Art.12-2)
:
-
6. Assessment and verification system of the
performance constancy (Annex 5)
:
System 3
7. Notified laboratory
:
NB 0476
KIWA CERMET ITALIA s.p.a.
Number of test report (based on System 3)
:
6002365 / C-387
8. Declared performances
HARMONISED TECHNICAL SPECIFICATION
EN 14785
PERFORMANCE FEATURES
PERFORMANCE
Fire resistance
A1
Distance from combustible material
200 mm
Fuel spillage risk
Compliant
Emission of combustion products
- Nominal power
- Reduced power
CO at 13% of O2 0.012 %
CO at 13% of O2 0.054 %
Effective temperature
Compliant
Electrical safety
Compliant
Accessibility and cleaning
Compliant
Maximum operating pressure
-
Mechanical strength
NPD (performance not determined)
Thermal performance
- Nominal power (reduced)
- Nominal power (reduced) yielded to the
environment
7.4 kW (2.5 kW)
7.4 kW (2.5 kW)
Yield
- Nominal power
- Reduced power
ɳ 92.5 %
ɳ 94.5 %
Flue gas temperature
- Nominal power
- Reduced power
T 115.2 °C
T 60.0 °C
9. The performance of the product referred to in points 1 and 2 is compliant with the declared performance in
point 8.
This declaration is released on the sole responsibility of the manufacturer referred to in point 4.
Signed in the name and on behalf of the manufacturer by:
San Bonifacio (VR), 01/08/2018
Mario Muraro
Chairman of the Board