43
SOFT 80, SOFT 100 PELLET-BURNING STOVE
Cleaning the glass-ceramic panel
Always clean the glass when the appliance is off and has cooled down completely. Use a damp cloth or a detergent
specifically formulated for glass-ceramic. Do not use abrasive sponges. Do not clean the glass if it is still warm;
temperature changes can cause it to break.
Cleaning the flue
The flue must be cleaned at least once a year, at the beginning of winter, and whenever it becomes necessary.
It is important to check for any obstructions in the flue before switching the appliance on following long periods of
inactivity.
If the flue is not cleaned, the operation of the appliance and its components may be impaired.
The frequency of cleaning of the appliance and flue depends on the quality of the pellets used.
USE PREMIUM-QUALITY PELLETS FOR BEST RESULTS.
Maintenance
Timely and systematic maintenance is essential for guaranteeing correct operation, optimal heating performance and
durability of the entire device. Therefore, the device should be checked by qualified staff at least once a year at the
beginning of the season.
It is necessary to periodically check the seals as they guarantee air- and water-tightness of the appliance and its efficient
operation; if they are worn or damaged, they must be replaced immediately by contacting a Klover authorised
Technical Assistance Centre.
For proper operation, the appliance must undergo routine maintenance performed by a Klover authorised
Technical Assistance Centre at least once a year.
To Next Page
Loading...
