7. Stereo True Double Tracking Doubler
Doubling guitars is a common practice in a wide variety of musical genres. In the majority of
cases, a single guitarist will record the same (mono) track twice, with one track being panned to
the left channel and the other to the right channel. The effect of this is unmistakable to the ear
and the slight differences and nuances between the two separate performances complement
each other, helping to create a noticeable thickness, density and weight to the musical
experience.
Please be aware that this effect is not the same as simple doublers (that just delay one side of the
signal and introduce modulation) or other ADT type solutions that are available on the market
today. KMA has carried out extensive research on how to make double tracking sound exactly
how we believe it should perform. We’ve spent thousands of man hours developing our own
proprietary solution, even designing our own custom neural network AI with onset detection in
the process.
Enabled via the Foot-switch, KMA’s True Double Tracking Doubler accurately replicates the
minor differences that could exist within two separate recordings and the width can spread your
doubled tracks anywhere from completely centred to 50% left and right and 100% left and right
split.
To Next Page
Loading...
