Power Supply Unit (PSU) Requirements
ENDGAME requires a standard 9 V DC PSU (not supplied) that is capable of providing a minimum
of 480 mA with a 2.1 mm Negative Centre polarity. KMA always recommends a good pedal-
specic, transformer-isolated power supply unit or multiple isolated-output devices to prevent
extraneous noise. Unclean or unregulated power, daisy chains and non-pedal specic power
supplies can cause issues. Please verify that the specied voltage required by a connected mains
power supply unit matches the mains supply voltage in your country. If not or if you are unsure,
do not connect the power supply unit to a mains voltage outlet. Using an incorrect power supply
unit could result in damage to the product and/or injuries to the user. This product must not be
used when there is atmospheric lightning. In case of severe weather with a risk of lightning,
unplug the power supply unit from the mains power and the device to reduce the risk of electric
shock and/or re.
KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm
8 von 57 08.01.2025, 14:38
To Next Page
Loading...
