KNOX COMPANY | 800-552-5669 | TECHSUPPORT@KNOXBOX.COM | KNOXBOX.COM | OPE-KSCNFG-0292-I | PAGE 18 of 25
To Sync Knox Devices with KnoxConnect Cloud
Note: You must first configure the settings in KnoxConnect Cloud for the Knox device before syncing.
Note: Before beginning, check KnoxConnect Cloud to verify that the firmware on your Knox device is the most
recent version.
1. Open Knox Device Sync by clicking on the icon on your desktop.
2. Connect the Knox device to the computer with the USB to Mini USB cable.
3. The Knox device serial number will automatically populate.
4. Select the Start button and the Knox device will update, status will read “Finished: OK” when complete.
To Next Page
Loading...
Need help?
General