Knox KeySecure 5 Networking Guide

Knox Networking Guide
KNOX COMPANY | 800-552-5669 | TECHSUPPORT@KNOXBOX.COM | KNOXBOX.COM | OPE-KSCNFG-0292-I | PAGE 24 of 25
Setting the Ethernet Dynamic IP Configuration
To set a Static Ethernet IP address for the KeySecure:
1. On the KnoxConfig Software screen, under Network Settings, select the Use Ethernet radio button.
2. Under Ethernet Settings, select the Obtain IP Address Automatically radio button to open the IP
configuration table.
3. Go to the last step, Saving Your Settings.
Setting the Ethernet Static IP Configuration
To set a Static Ethernet IP address for the KeySecure:
1. On the KnoxConfig Software screen, under Network Settings, select the Use Ethernet radio button.
2. On the KnoxConfig Software screen, under Ethernet Settings, select the Using The Following IP
Configuration radio button to open the IP configuration table.
3. Enter the IP Address, Subnet Mask, Default Gateway and DNS Server information.
4. Go to the last step, Saving Your Settings.

Knox KeySecure 5 Specifications

General

Brand	Knox
Model	KeySecure 5
Category	Locks
Language	English