KDC180
Quick Guide
See Reference Manual for more detailed information
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC180_20201014 p17
6.2 Pair/Connect KDC with Gear S3
Put KDC180/KDC280 into SPP mode and start pairing (you can also see Chapter 2
in this document)
Bluetooth Profile & Pairing
Run KTSimpleWebDemo on your Gear S3.
Tap “Connect” and the available devices will be listed on your Gear S3. Tap the KDC from the list of
available devices to connect. The number between the brackets refers to the serial number located
on the back of the KDC.
To Next Page
Loading...
