KDC180
Quick Guide
See Reference Manual for more detailed information
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC180_20201014 p19
7.1 Social Distancing Feature Parameters
The following parameters can be changed:
Distance: Set the acceptable social distance range with values between 1 to 10 meters (Default:
Disabled).
Host Alert: This setting will forward distance alerts to the connected host device (Default: Disabled).
KDC Alert: This setting allows the user to enable/disable an audible beep sound (Default: Enabled),
vibration (Default: Disabled), and data storage (Default: Disabled) settings for distance violations on the
KDC.
Security Key: Choose between fixed key or a custom key. Only KDC devices using the same key will be
able to detect and report the distance between devices. If fixed key is selected, the KDC will use a
predefined key. If you prefer to set your own custom key, this action can only be performed though
using KTSync (Default: Fixed Key).
7.2 Enabling the Social Distancing Feature via the KDC Menu
If you prefer to enable the social distancing feature by navigating through the KDC menu, then follow the
instructions below:
a) From KDC BLE Config menu, select Social Dist. to configure
b) Set the Distance from 1m to 10m
c) Set the Host Alert to enable/disable
d) Set the KDC Alert: Beep, Vibrator, and Data Store to desired settings
e) Set the Security Key: Fixed Key or Custom Key
7.3 Enabling the Social Distancing Feature via Social Distance Barcodes
If you prefer to enable the social distancing feature via special barcodes, scan the special social distance
barcodes that correspond with the settings you wish to enable:
To Next Page
Loading...
