KDC180
Quick Guide
See Reference Manual for more detailed information
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC180_20201014 p8
Active Read 10 Minute Timeout
Enabled (Default)
Disabled
3.4 UHF Tag Counting (Beep Count)
By setting the Count attribute, you can get an estimate of how many tags are read per beep.
• Count = 0: The device only beeps once when you start reading
• Count = 5: Beeps once every 5 tags read. Example: 2 beeps means you read 10 to 14 tags.
• Count = 10: Beeps once every 10 tags read. Example: 2 beeps means you read 20 to 29 tags.
• Count = 20: Beeps once every 20 tags read. Example: 2 beeps means you read 40 to 59 tags.
• Count = 50: Beeps once every 50 tags read Example: 2 beeps means you read 100 to149 tags.
Scan the barcode on below that corresponds with your preference for Tag Counting.
Count = 0
Count = 50
Count = 5
Count = 10
Count = 20
To Next Page
Loading...
