What to do if the motor is not working on my KOBE Ventilation Hood?
If the lights on your KOBE Ventilation Hood are working, but the motor(s) is not, the motor(s) itself might be defective and need replacement. Alternatively, the capacitor(s) could be defective, requiring replacement. Finally, the control panel might be defective, also requiring replacement.
General| Material | Stainless Steel |
|---|---|
| Lighting | LED |
| Model | Premium Series |
| Control Type | Touch |
| Available Sizes (inches) | 30, 36, 42 |
| Speed Levels | 3 |
| Filter Type | Baffle |
| Width | 30, 36, 42 inches |
| Voltage | 120V |
Check contents, inspect for damage, and test unit before installation.
Do not install if damaged; have invoice/serial number ready; contact merchant or customer service.
No returns if product is installed, punctured, or packaging is missing.
Professional installation, avoid hidden utilities, vent outside, power off before servicing.
Keep surfaces clean, turn hood on, use high settings cautiously, do not leave unattended.
Smother flames, keep flammables away, evacuate if needed, do not use water.
Extinguish flames, do not turn on appliances, disperse gas, call authorities.
General ventilation use, metal ductwork, follow standards, avoid ignition sources.
Lists main hood, warranty card, filters, exhaust, wire caps, screws, etc.
Provides website and phone number for more information.
Lists hood, warranty card, filters, duct cover, mounting bracket, screws, etc.
Provides website and phone number for more information.
Defines dimensions A-E for under cabinet installation based on Table 1.
Defines dimensions A-F for wall mount installation based on Table 2.
Avoid debris in vent, decide vent location, test hood, peel film, seal joints, check opening.
Use hand tools, mark leveling point, secure mounting screws, attach and tighten brackets.
Connect exhaust pipe using steel pipe and duct tape for secure, airtight joints.
Ensure proper grounding, switch power off, connect wires with connectors.
Place airflow efficiency panel underneath the hood.
Turn power on, check operation, leave manual for homeowner.
Avoid debris, decide vent location, test hood, peel film, seal joints, prepare wall frame.
Use hand tools, mark leveling point, position mounting screws, attach and tighten brackets.
Use steel pipe to connect exhaust to ductwork with duct tape.
Ensure proper grounding, switch power off, connect wires with connectors.
Mark bracket position, attach bracket, position duct cover, secure inner and outer covers.
Place airflow efficiency panel underneath the hood.
Turn power on, check operation, leave manual for homeowner.
Describes buttons for Power, Light, Fan Speed, ECO Mode and LED display indicators.
Hood turns on automatically with flame/fire sensors; functions with gas ranges.
Automatic or manual 5-minute delay shut-off for fan; lights operate independently.
Activates fan on QuietMode™ for 10 mins/hr to improve air quality; independent of other modes.
Turn hood on/off manually; speed defaults to 3, adjustable via buttons.
Cycle light intensity through bright, medium, dim, and off; independent of power/speed.
Control power, delay shutoff, fan speed, ECO, and light from a distance.
Use mild soap, soft cloth, or stainless steel cleaner; avoid abrasives and steel wool.
Drain oil, wash with soapy water, dishwasher safe; wear gloves when removing.
Lists model numbers, sizes, color, consumption, power rating, blower, design, exhaust, controls, lights.
Provides hood and duct cover dimensions for different models.
Lists optional back panels and weights for different models.
Details Air Capacity (CFM) and Sone (dB) for various speeds.
Provides detailed measurements and diagrams for under cabinet models.
Provides detailed measurements and diagrams for wall mount models.
Shows dimensions for the hood mounting bracket.
Shows dimensions for the duct cover mounting bracket.
Lists part numbers and descriptions for under cabinet models.
Visual representation of parts for under cabinet installation.
Lists part numbers and descriptions for wall mount models.
Visual representation of parts for wall mount installation.
Shows wiring connections between motor, transformer, processor board, and control panel.
Addresses problems like power not on, motor vibration, lights not working, venting issues, and cold air.
Two-year limited labor and parts warranty for manufacturing defects in the US and Canada.
Lists items not covered, such as normal wear, consumable parts, damage from misuse, accidents, or unauthorized repairs.
Conditions that void the warranty, including improper installation, unauthorized repairs, duct alteration, and misuse.
Provides email and phone numbers for warranty service in the US and Canada.
Prompts user to record date of purchase, model number, and serial number.
Repeats contact information for warranty service and spare parts purchase in US and Canada.
States hood is for USA/Canada only; overseas use voids warranty.
To Next Page
