Operating manual Energy storage solutions
V1.3DE/EN
12
3 Basic safety instructions
English
3B
ASIC
SAFETY
INSTRUCTIONS
3.1 Personnel
Minimum age Not specified.
Duty of care and
attention
Personnel must:
• Be qualified electricians
• Have read and understood the operator's manual
• Have been instructed in how the Energy storage solutions works
• know how to do the individual jobs.
What to do in an
emergency
Please note the following points:
• The locations of first-aid stations must be known.
• The personnel must be informed about what to do in an emergency.
• Their correct behaviour must be regularly checked monitored and
corresponding records must be kept.
The following must be done in an emergency:
• Provide first aid to all injured persons.
• Call a doctor or your in-house paramedic.
• Notify your manager.
• Follow the instructions from your managers and first-aid staff.
3.2 The device
Functional status The Energy storage solutions may only be operated in a fully functional state. Before
using it, ensure that the Energy storage solutions is in proper working condition.
Brake (only for DEK,
DEV, KEK, KEV)
If the application has a brake, which is not fed by the DC link in case of a power failure,
this may result in the application working against the unpowered brake.
Hot surfaces The housing may heat up to 80° C in operation. Do not touch the housing.
Warning symbols Warning symbols are attached to the housing. Any damaged warning symbols must
immediately be replaced.
Housing The housing must not be opened.
Functional faults No electrical equipment may be used near to the Energy storage solutions which
could impair the function of the Energy storage solutions.
The Energy storage solutions may not be subject to any shock or vibration.
To Next Page
Loading...
Need help?
General