Kodak 6950 - Installing the Trim Tray

Setting Up the Printer
October 2020 2-5
Installing the Trim Tray
1. Insert the trim tray on the front of the printer:
• Tilt the top of the trim tray inward.
• If you have the 6950 Printer, make sure that the diverter
goes inside of the front compartment of the trim tray.
• Push in the bottom of the trim tray.
Note: If the trim tray is not inserted properly, a paper jam can
occur.
A190_0004AA
A200_0032HA
6900 Printer
6950 Printer
Trim Tray
Trim Tray
Diverter