Troubleshooting
October 2020 5-11
18. Install the paper and ribbon. See pages 2-9 and 2-16.
19. Close the front of the printer.
20. Install the trim tray. See page 2-5.
21. Install the exit tray (if present). See page 2-6.
Repairing a Damaged Ribbon
1. Move the power switch to the Off ( ) position.
2. Remove the exit tray (if installed).
3. Remove and empty the trim tray. See “Removing the Trim
Tray” on page 2-6.
To Next Page
Loading...
