Maintaining the Printer
October 2020 3-7
14. Install the paper and ribbon. See pages 2-9 and 2-16.
15. Close the front of the printer.
16. Install the exit tray (if present). See page 2-6.
Cleaning the Cleaning
Roller
1. Move the power switch to the Off ( ) position.
2. Remove the exit tray (if installed).
3. Remove and empty the trim tray. See “Removing the Trim
Tray” on page 2-6.
4. Pull the latch on the front door.
To Next Page
Loading...
