Kodak 6B8773 - Manual; Select a Lens from the User List

Configuring your Camera
April 28, 2004 5-33
Manual 1. With the appropriate lens mounted on the camera, determine the
optimum strength for the current focal length and aperture using
Photo Desk Software (see page 5-44).
2. Choose Lens Optimization from the Capture menu, then choose
Manual.
3. Press the right side of the Five-way control to display the edit boxes.
4. Press the right or left side of the Five-way control to highlight a box.
Press the top or bottom of the Five-way control to change a value.
NOTE: The strength must be between zero and 99.
5. Press the OK button.
Select a Lens from the User
List
Once you add a lens to the user list (see page 5-35) or define a new lens
(see page 5-39), you can select it.
1. Choose Lens Optimization from the Capture menu, then choose a lens.
2. Press the OK button.