Powering Your Camera
April 28, 2004 3-5
Conserving Batteries Your camera has battery save features that do the following:
• Puts the camera into a low power mode if you don’t touch any controls
for a specified period of time (see page 5-2).
• Turns off the exposure meter if you don’t touch any controls for a
specified period of time (see page 5-3).
• Turns off the Image LCD if you don’t touch any digital buttons for a
specified period of time (see page 5-2).
To maximize battery performance, turn the camera off or remove the
battery when not in use.
For more information on battery conservation, go to
http://www.kodak.com/go/DCS.
NOTE: You can change the battery save time for the camera or Image LCD
or change the Meter Off time (see page 5-3).
Situations Using Extra
Battery Power
• Use of a telephoto or wide-angle fisheye lens and constant autofocusing
• Frequent use of the Image LCD
• Cold temperatures
• Frequently turning the camera on and off
• Setting the Meter Off Time custom setting to Never
To Next Page
Loading...
