The Basics
April 28, 2004 4-13
Setting the Time/Date A time and date stamp is associated with each image file.
A CR 2032 coin cell battery maintains the time and date for approximately
one to two years. If this battery loses its charge, you must replace the
battery and reset the time and date.
1. Choose Time/Date from the Basic menu.
2. Press the right or left side of the Five-way control to select hours,
minutes, or seconds. Press the top or bottom of the Five-way control
to change the value.
3. Repeat step 2 for year, month, and day.
4. Press the OK button.
Shortcut:
• You can also access this function using the Hotkey shortcut.
Setting User Mode Follow the steps on page 4-2 to choose Basic or Advanced mode.
To Next Page
Loading...
