Focusing
April 28, 2004 8-3
Selecting the Autofocus
Zone
You can set the active Autofocus zone.
1. Lightly press the Shutter button to wake up the camera.
2. Press the Exposure Compensation / AF Zone button twice in quick
succession. Continue pressing the button after the second press.
The current active AF zone brackets are illuminated on the Viewfinder
focus screen.
3. Rotate the C-Dial clockwise to select the desired zone (center, right,
left, up, down, or all), then release the Exposure Compensation / AF
Zone button.
If you set the Autofocus zone to All, the camera focuses on the closest
object that a single zone detects.
4. Lightly press the Shutter button to enable your selection and exit the
AF Zone function.
To Next Page
Loading...
