7-14 April 28, 2004
Controlling Exposure
To Determine the Exposure
Value Using the Camera’s
Exposure Meter
Rotate the Mode Selector lever to M. When you lightly press the Shutter
button, the shutter speed and aperture value appear in the Viewfinder, and
the Viewfinder’s Exposure meter indicates the difference between the
selected exposure and the correct exposure. For example:
The Exposure Meter can display the exposure error up to ± 3 stops from
correct exposure in 1/3 stop increments. If the exposure error is more
than 3 stops, the Exposure Meter blinks.
1.7 stops below (under exposure)
Correct exposure
3.0 stops over (over exposure)
1.7
0.0
3.0
To Next Page
Loading...
