A-61602 June 2013 4-7
6. Rotate the orange tab down. If the tab is not in the down position,
you will not be able to reinstall the input tray.
7. Reinstall the input tray by locating and aligning the four tabs on the
input tray with the slots on the scanner.
8. When tabs and slots are in place, roll the input tray toward the back
of the scanner until it snaps into place.
Supplies and
consumables
Contact your scanner supplier to order supplies.
NOTE: Items and catalog numbers are subject to change.
Description CAT No.
Kodak ScanMate i1120 Pre-separation pad 894 6097
Kodak ScanMate i1120 Feed Roller Assembly 122 6034
Kodak ScanMate i1120 Scanner Cleaning Swabs 824 5862
Kodak Digital Science Roller Cleaning Pads 853 5981
Kodak Digital Science Transport Cleaning Sheets (qty 50) 169 0783
Staticide Wipes for Kodak Scanners 896 5519
To Next Page
Loading...
