A-61602 June 2013 2-1
2 Installation
Contents Installing the scanner......................................................................2-1
Install the Kodak Driver Software................................................2-1
Attach the input tray....................................................................2-2
Attach the output tray..................................................................2-4
Connect the power cord and USB cable.....................................2-5
Turning on the scanner ...................................................................2-6
Turning the scanner off ...................................................................2-6
Starting the scanner after an automatic power off...........................2-6
Installing the scanner This section provides detailed information of the Installation Guide that
is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTES:
• If you have already performed all of the steps in the Installation
Guide, skip this section.
• The Kodak Driver Software must be performed first, before
installing any other portions of the scanner.
Installing the Kodak Driver
Software
1. Insert the Kodak ScanMate i1120 Scanner Installation CD in the
CD-ROM drive. The installation program starts automatically.
2. Select Install Scanner Software.
NOTES:
• If the CD does not start automatically, open the My Computer
icon on your desktop. Double-click the icon indicating your
CD-ROM drive, then double-click on setup.exe.
• If the message Portions of this application are already
installed is displayed, click Yes to continue the installation
process. Any previously installed Kodak Scanner software that
is shared with this scanner will be updated.
To Next Page
Loading...
