Handling Paper
22 www.kodak.com/go/aiosupport
Loading photo paper
The input tray capacity is 20 sheets of photo paper.
To load photo paper:
1. Remove any paper from the input tray.
2. Insert the paper (short side first) into the center of the input tray with the
logo
side toward the tray
and the glossy side toward you.
IMPORTANT: Always load the paper short side first. The printer automatically detects
the orientation of the picture, whether it’s portrait or landscape, and prints
accordingly. If the photo paper is loaded in the wrong direction, the image
will be cut off and the paper may jam. If the paper is loaded with the wrong
side up, the image quality will be affected.
3. Move the paper-edge guides until they touch the paper.
To Next Page
Loading...
Need help?
General
