www.kodak.com/go/aiosupport 63
KODAK ESP C310 All-in-One Printer
Updating manually if your printer is connected to a computer with MAC OS
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Select the Tools tab.
4. Click Check for Software Updates.
5. If there are software updates, follow the on-screen instructions for updating
your software.
To u p d a t e t h e f ir m w a re :
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Open Home Center Software.
4. Select the Tools tab.
5. Click Check for Printer (Firmware) Updates.
6. If there are updates, follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Doing so may cause the printer to become inoperable.
To Next Page
Loading...
