Only
brief
operating
instructions
are
given
on
this
page.
Read
on
for
important
details.
Remove POWER CORD and REMOTE·CONTROL
CORD
from cord compartment (on under·
side of prolector).
Plug remote·control
cord Into rear of projector. Plug power
cord Into 110· to 125-volt, 60
Hz
power
outlet. See page 5.
Briefly
push FORWARD BUTTON on projec·
tor or
FOR
(forward) button on remote
control to
project first slide on screen.
See page 8.
BUTTON
TRAY
Place loaded slide tray on projector with
TRAY
INDEX BAR opposite GATE INDEX. See
page 8.
Rotate
FOCUS KNOB
until
projected Image
is
sharp. See page 9.
Briefly
push forward button on projector
or on remote
control to change slides. For
immediate random
projection of any
sUde
in
tray, firmly press and hold down SELECT
BAR,
rotate tray to desired slide number,
and then release select bar. See page 9.
3
To Next Page
Loading...
