3
37
Selecting Exposure Metering
To ensure proper exposure, your camera features three metering systems for
measuring the amount of light entering the camera lens: Multi-Pattern, Center-
Weighted, and Center Spot metering.
NOTE: Select a metering system to control how light affects the
subject in your pictures.
1 Set the Mode dial to a Capture
setting (P, 2.8, 5.6, or 8).
2 Press the Menu button to display
the Capture Menu screen.
3 Press a button until the
icon is highlighted.
4 Press OK to display the Metering
screen.
5 Press a button to highlight the Metering system you want to
use.
m
MULTI-PATTERN (default)—evaluates the lighting conditions in the
entire scene to give an even picture exposure. Ideal for general picture
taking.
m
CENTER-WEIGHTED—evaluates the lighting conditions of the subject
centered in the viewfinder. Ideal for backlit subjects.
m
CENTER SPOT—similiar to Center-Weighted, except the metering is
concentrated on a smaller area of the subject centered in the
viewfinder. Ideal when an exact exposure of a specific area in the
picture is needed.
6 Press OK to accept the changes and return to the Menu screen.
7 Press Menu to exit the Menu screen.
This setting remains until you change it.
To Next Page
Loading...
