21 www.kodak.com/go/support
Taking pictures/videos
Using Program mode
The Program Scene mode gives access to the greatest number of settings.
1 Tap , then tap Scene Modes.
2 Tap Program.
NOTE: Settings that you change in Program mode apply only to pictures taken in Program mode. Use Reset
Camera (see page 46) to reset Program mode to its default settings.
Changing Program mode settings
In Program Scene mode, tap a setting. Then change its value.
Using exposure compensation to adjust brightness
In Program and Panorama modes, you can adjust exposure compensation before you
take a picture to make your pictures darker or lighter. (Only the first picture in
Panorama mode can be adjusted—that adjustment is applied to the remaining
pictures.)
1 Tap Exposure Compensation to access the exposure compensation setting.
2 Drag the slide to increase or decrease exposure compensation.
The scene in the LCD gets lighter or darker.
3 Take the picture when you are satisfied with the exposure compensation level.
Capture
mode
Flash
Self-timer/Burst
Exposure compensation
ISO
Touch Shutter
White balance
Focus/Exposure zone
Color mode
Sharpness
Settings
Swipe
to see
these
tools.
To Next Page
Loading...
Need help?
General
