www.kodak.com/go/support 48
6 Installing software, sharing
Install software, transfer pictures, and share
IMPORTANT:
To use the sharing and social networking features, you must install the
KODAK Share Button app.
1 Make sure the computer is connected to the Internet.
2 Turn off the camera.
3 Using the KODAK Camera USB Cable, Micro B /
5-Pin, connect the camera to the computer. (Use
only the cable included with this camera.)
The camera turns on.
4 Follow the prompts on your computer screen to
download and install the Share Button App on your
computer.
IMPORTANT:
If the installer does not run, choose and
install the right version for your computer:
www.kodak.com/go/camerasw.
5 After the software is installed, follow the prompts
to transfer pictures and videos to your computer.
Pictures/videos that you tagged for sharing are emailed
or uploaded to social networking sites.
NOTE: You can also use a card reader to transfer pictures/videos to your computer.
Download KODAK Software later www.kodak.com/go/camerasw
Get Software help www.kodak.com/go/support
See How-To videos www.kodak.com/go/m5370demos
To Next Page
Loading...
Need help?
General
