3 www.kodak.com/go/support
Getting started
Setting the date & time, anytime
1 Turn on the camera. Press the Menu button.
2 Press to highlight Setup Menu , then press the OK button.
3 Press to highlight Date & Time , then press the OK button.
4 Press to adjust the date and time. Press to advance to the next
setting.
5 When finished, press the OK button.
6 Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera
clock when you connect the camera. See EasyShare software Help for details.
Turning the camera on and off
■ While pressing the Mode dial lock, turn the Mode
dial from Off to Auto .
The Power ring glows green. The camera screen turns
on. The Ready light blinks green while the camera
performs a self-check, then turns off when the camera
is ready.
■ To turn off the camera, turn the Mode dial to Off.
Mode dial lock
Power ring
To Next Page
Loading...
Need help?
General
