15 www.kodak.com/go/support
Taking pictures and videos
3 Press the Menu button to change other settings. (See page 21.)
4 Take a picture.
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
You can change the flash setting in any Still mode; the default flash setting is restored
when you exit the mode or turn off the camera.
Turning on the flash
NOTE: The flash is not available in all modes. See Flash settings in each mode, page 16.
Zoom position Flash Range
Wide Angle 2-13.1 ft (0.6-4 m)
Telephoto 2-7.5 ft (0.6-2.3 m)
Flash Setting Flash Fires
Auto When the lighting conditions require it.
Off Never
Fill Every time you take a picture. Use when the subject is in shadow or is
“backlit” (when light is behind the subject).
Red-eye Once, so the subject’s eyes become accustomed to the flash, then fires
again when the picture is taken. (If the lighting conditions require flash
but do not require Red-eye reduction, the flash may fire only once.)
Press the
Flash/Status
through the flash options.
The active flash icon is displayed
in the camera screen status area.
button to scroll
To Next Page
Loading...
Need help?
General
